We learn how to properly fill the line with a trimmer
In connection with the fact that even in our country allMore spreading is acquired by lawns, in stores for gardeners there is an increased demand for trimmers. This tool is extremely useful, because it allows not only to level the lawn, but also to hay for livestock.
But beginners rarely know even the most basic rules of caring for this technique. So, the most common is the question of how to properly fill the line with a trimmer.
First of all, it should be said that knives or a fishing line can be used as a cutting element in trimmers. Their advantages and disadvantages are in both species.
So, knives are much better at coping with shrubs anddry stamping, but the polymer thread is much cheaper and more affordable. In addition, the line for the trimmer 4 mm, too, allows you to mow down sufficiently hard grass. Of course, the knife can not be compared, but the efficiency is also not bad.
Note that even in the latter case, you need to accuratelyKnow what its diameter is used in your trimmer. Producers do not take all the values from the ceiling: if you take a fishing line larger, then greatly overload the engine, which can cause the latter to fail.
Do not do that!
Among our kulibins, it is widely believed: before correctly fixing the line in the trimmer, you need to change it to something more efficient. A rope, for example ...
Not to mention the monstrous load on the engine,breakage of the cable can lead to serious consequences for your limbs. It is better to use recommended consumables than to become a patient of a surgeon.
If you really need to cut lawns,which are heavily overgrown, manufacturers offer special consumables with an increased surface area. In this case the line of smaller thickness is plaited into a kind of pigtail. The normal thickness remains, but the efficiency becomes higher.
Before correctly filling the line intrimmer, you need to cut off the right amount. Do not be greedy, as for the first time and five meters is enough for training. To do this, a protective cover is removed from the trimmer coil, and one end of the line is clamped in a special clamp (or slot).
Winding should be evenly, trying not toPull. In general, you need to fill the coil until the layer of the line is aligned with the coil's edge. She should not lie too tightly, somewhat straightening out after putting on the casing.
Then the remaining end of the line is passed throughhole on the protective cover. After that, the coil and its protective cover are connected, and the piece of fishing line is already passed through the hole on the protective cover this time.
The assembly is assembled on a trimmer,Turn clockwise until a clearly audible click is heard. By the way, before installing the fishing line on the trimmer, you can better understand its design. Otherwise, you can easily break something.
That's all. The tool is placed in the working position, turned on, after which an extra piece of fishing line is itself cut against a specially made blade for this purpose.